接続実験室
こちらは、Ｘ６８ｋに繋げるかも知れないけど、対応機種にＸ６８ｋが書いてない（メーカー未保証）
ものを試しに繋いでしまおう！という、実に人柱モード全壊なコーナーです（笑）
というワケで、本ページの内容に関してメーカーへの問い合わせはしないで下さい！！
● ２．３ＧＢ ＳＣＳＩ−ＭＯドライブ（内蔵型）
製品に関する詳細情報はメーカーの方が充実してますので、ここには置きません。
上のリンクを参照願います。
★２．３ＧＢの大容量＆高速ＭＯドライブ！
このドライブは、大容量＆高速がウリです。128MB〜640MBメディア時は6094rpm！1.3GB/2.3GB
メディア時は4853rpm・・・これはHDD並の転送速度が期待出来そうです。
尚、対応OSにWindows95やWindowsNTなんていう記載があるので、X68kでの接続も問題なさそう。
★実験結果
（１）接続：SUSIE.Xにて認識OK。
（２）各メディア毎の対応
128MB〜540MBメディア
FORMAT.XでのフォーマットOK。同容量HDDとのDISKCOPYもOK。
640MB〜2.3GBメディア
FIM.XでのフォーマットOK。
尚、最新のFIMであれば、2GBを超える容量を確保する事はありません。 ＦＩＭのフォーマット容量については調査中です。
（３）転送速度
転送速度としては、大容量ほど高速、という結果になりました。同一回転数であれば、高密度ほど
転送容量が大きくなるので、ある意味当然ですが（汗）
尚、2.3GBで速度が頭打ちになっていますが、Ｘ６８ｋのSCSI-I/F側の限界なのかも知れません・・・
詳細は下記テストデータを参照してください。
★接続に必要なハードウェア
こちらを参照願います。SCSIコネクタ形状は50Pです。
尚、５インチベイマウンタが付属していますので、マウンタを別途準備する必要はありません。
★Human68k使用時、必要なソフトウェア
（１）SUSIE.X (c)1994-97 GORRY.／LS-120対応：TNB製作所 ※TNB製作所HPは現在リニューアル準備中のようです。
言わずと知れた各種ＳＣＳＩ機器用デバイスドライバ。
IBM-STANDARDフォーマッタ。640MB以上のＭＯはFORMAT.Xでは扱えませんので
これでフォーマットして下さい。
★テストデータ
テスト環境は、X68030/060turbo、SCSIホストアダプタはMach-2で行っております。
A>INQ 3
ＩＮＱＵＩＲＹ データの表示 (ver0.1) by L.Hawk
target ID:03 , FUJITSU MCR3230SS-S
adr data extra
0 : 07 : Device Type / 光メモリーデバイス
1 : 80 : RMB & その他 / リムーバル (メディア交換可)
2 : 02 : 準拠規格 / ANSI X3T9.2/86-109(SCSI-2)準拠
3 : 02 : Bus format他 / ( bit7:AENC, bit6:TrmIOP, bit3-0:Response Data format )
4 : 2b : 全データ長 / 2b bytes
5 : 00 : (Reserved)
6 : 00 : (Reserved)
7 : 10 : Deviceデータ / bit 7 : 相対アドレスモード 使用不可
bit 6 : Wide SCSI 32 bits 使用不可
bit 5 : Wide SCSI 16 bits 使用不可
bit 4 : 同期転送モード 使用可
bit 3 : コマンドリンク機能 使用不可
bit 2 : (Reserved)
bit 1 : コマンドキューイング 使用不可
bit 0 : ソフトリセット機能 ０
8 : : 追加データ |FUJITSU MCR3230SS-S 0020MO|
A>ASKSCSI 3 AskSCSI: Ask SCSI status : V1.13A+t2 : Copyright 1994-96 GORRY. Machine CPU : 68060 Machine ROM : 1.5 97/05/29 Interface : External SCSI Interface Board (Mach-2) - ROM Level=6412 ID : 3 Inquiry-Unique : "FUJITSU MCR3230SS-S 0020" : (Lbender Lproduct Lrevision) Inquiry-Device : Optical Device Inquiry-RMB : Removable Inquiry-Version : ISO=0 ECMA=0 ANSI=2 (SCSI-2) Inquiry-Restype : SCSI-2 Block capacity : $3CBFA (121MBytes) Block size : 512 Cylinder size : $200 (no MODE SENSE) Sec/Track size : $200 (no MODE SENSE) Number of Head : 1 (no MODE SENSE) Format : X68000 (Human68K SCSI-DISK by Keisoku Giken) $00 "Human68k" [Boot Active] Start=$000040 Size=121MByte SecSize=$0400 CluSec=$0002 FATSec=$0001 FATCnt=$0002 RootDir= 512 MaxSec=$01E400 MediaID=$F6 FATSiz=$007A
A>ASKSCSI 3 AskSCSI: Ask SCSI status : V1.13A+t2 : Copyright 1994-96 GORRY. Machine CPU : 68060 Machine ROM : 1.5 97/05/29 Interface : External SCSI Interface Board (Mach-2) - ROM Level=6412 ID : 3 Inquiry-Unique : "FUJITSU MCR3230SS-S 0020" : (Lbender Lproduct Lrevision) Inquiry-Device : Optical Device Inquiry-RMB : Removable Inquiry-Version : ISO=0 ECMA=0 ANSI=2 (SCSI-2) Inquiry-Restype : SCSI-2 Block capacity : $6CF75 (217MBytes) Block size : 512 Cylinder size : $200 (no MODE SENSE) Sec/Track size : $200 (no MODE SENSE) Number of Head : 1 (no MODE SENSE) Format : X68000 (Human68K SCSI-DISK by Keisoku Giken) $00 "Human68k" [Boot Active] Start=$000040 Size=217MByte SecSize=$0400 CluSec=$0004 FATSec=$0001 FATCnt=$0002 RootDir= 512 MaxSec=$036400 MediaID=$F6 FATSiz=$006E
A>ASKSCSI 3 AskSCSI: Ask SCSI status : V1.13A+t2 : Copyright 1994-96 GORRY. Machine CPU : 68060 Machine ROM : 1.5 97/05/29 Interface : External SCSI Interface Board (Mach-2) - ROM Level=6412 ID : 3 Inquiry-Unique : "FUJITSU MCR3230SS-S 0020" : (Lbender Lproduct Lrevision) Inquiry-Device : Optical Device Inquiry-RMB : Removable Inquiry-Version : ISO=0 ECMA=0 ANSI=2 (SCSI-2) Inquiry-Restype : SCSI-2 Block capacity : $FE45C (508MBytes) Block size : 512 Cylinder size : $200 (no MODE SENSE) Sec/Track size : $200 (no MODE SENSE) Number of Head : 1 (no MODE SENSE) Format : X68000 (Human68K SCSI-DISK by Keisoku Giken) $00 "Human68k" [Boot Active] Start=$000040 Size=508MByte SecSize=$0400 CluSec=$0008 FATSec=$0001 FATCnt=$0002 RootDir= 512 MaxSec=$07F000 MediaID=$F6 FATSiz=$0080
A>ASKSCSI 3 AskSCSI: Ask SCSI status : V1.13A+t2 : Copyright 1994-96 GORRY. Machine CPU : 68060 Machine ROM : 1.5 97/05/29 Interface : External SCSI Interface Board (Mach-2) - ROM Level=6412 ID : 3 Inquiry-Unique : "FUJITSU MCR3230SS-S 0020" : (Lbender Lproduct Lrevision) Inquiry-Device : Optical Device Inquiry-RMB : Removable Inquiry-Version : ISO=0 ECMA=0 ANSI=2 (SCSI-2) Inquiry-Restype : SCSI-2 Block capacity : $4BC50 (606MBytes) Block size : 2048 Cylinder size : $200 (no MODE SENSE) Sec/Track size : $200 (no MODE SENSE) Number of Head : 1 (no MODE SENSE) Format : IBM STANDARD-MO $00 "" [Unboot Active] Start=$000000 Size=605MByte SecSize=$0800 CluSec=$0008 FATSec=$0001 FATCnt=$0002 RootDir= 512 MaxSec=$04BBF8 MediaID=$F8 FATSiz=$0026
A>ASKSCSI 3 AskSCSI: Ask SCSI status : V1.13A+t2 : Copyright 1994-96 GORRY. Machine CPU : 68060 Machine ROM : 1.5 97/05/29 Interface : External SCSI Interface Board (Mach-2) - ROM Level=6412 ID : 3 Inquiry-Unique : "FUJITSU MCR3230SS-S 0020" : (Lbender Lproduct Lrevision) Inquiry-Device : Optical Device Inquiry-RMB : Removable Inquiry-Version : ISO=0 ECMA=0 ANSI=2 (SCSI-2) Inquiry-Restype : SCSI-2 Block capacity : $93E96 (1182MBytes) Block size : 2048 Cylinder size : $200 (no MODE SENSE) Sec/Track size : $200 (no MODE SENSE) Number of Head : 1 (no MODE SENSE) Format : IBM STANDARD-MO $00 "" [Unboot Active] Start=$000000 Size=1183MByte SecSize=$0800 CluSec=$0010 FATSec=$0001 FATCnt=$0002 RootDir= 512 MaxSec=$093E40 MediaID=$F8 FATSiz=$0025
A>ASKSCSI 3 AskSCSI: Ask SCSI status : V1.13A+t2 : Copyright 1994-96 GORRY. Machine CPU : 68060 Machine ROM : 1.5 97/05/29 Interface : External SCSI Interface Board (Mach-2) - ROM Level=6412 ID : 3 Inquiry-Unique : "FUJITSU MCR3230SS-S 0020" : (Lbender Lproduct Lrevision) Inquiry-Device : Optical Device Inquiry-RMB : Removable Inquiry-Version : ISO=0 ECMA=0 ANSI=2 (SCSI-2) Inquiry-Restype : SCSI-2 Block capacity : $1038EA (2076MBytes) Block size : 2048 Cylinder size : $200 (no MODE SENSE) Sec/Track size : $200 (no MODE SENSE) Number of Head : 1 (no MODE SENSE) Format : IBM STANDARD-MO $00 "" [Unboot Active] Start=$000000 Size=2076MByte SecSize=$0800 CluSec=$0020 FATSec=$0001 FATCnt=$0002 RootDir= 512 MaxSec=$103880 MediaID=$F8 FATSiz=$0021
A>DSKBENCH 3
X680x0 DISK benchmark version 0.44 by bisco
Original program:
ASPI SCSI benchmark test V0.4
copyright(c) by TsuruZoh Tachibanaya, Sep.02,1994
Initiator is ID7 : SHARP X68030 6412 Other-Port
Target device is ID3 : FUJITSU MCR3230SS-S 0020 SCSI2 Removable
512 Bytes per sector, capacity is 121 MBytes.
------------------------+-------------+-------+-------+-------+-------+-------+
Test mode : result | Poor | OK | Good | Great | Superb|
------------------------+-------------+-------+-------+-------+-------+-------+
Test unit ready command | 1.2[ms] :*********************
No motion seek command | 3.8[ms] :
Average latency Time | 5.4[ms] :***************************
------------------------+-------------+-------+-------+-------+-------+-------+
Sequential seek command | 5.1[ms] :********************
Random seek command | 25.0[ms] :****************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/Start 512B/rd| 138.2[KB/s]:***********
Seq.Read/Start 16384B/rd| 1264.0[KB/s]:*********
Seq.Read/Start 65536B/rd| 1267.2[KB/s]:*********
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/ End 512B/rd| 141.1[KB/s]:************
Seq.Read/ End 16384B/rd| 1264.0[KB/s]:*********
Seq.Read/ End 65536B/rd| 1267.2[KB/s]:*********
------------------------+-------------+-------+-------+-------+-------+-------+
Random Read 512B/rd| 13.9[KB/s]:**************
Random Read 16384B/rd| 329.6[KB/s]:**************
Random Read 65536B/rd| 729.6[KB/s]:**********
------------------------+-------------+-------+-------+-------+-------+-------+
A>DSKBENCH 3
X680x0 DISK benchmark version 0.44 by bisco
Original program:
ASPI SCSI benchmark test V0.4
copyright(c) by TsuruZoh Tachibanaya, Sep.02,1994
Initiator is ID7 : SHARP X68030 6412 Other-Port
Target device is ID3 : FUJITSU MCR3230SS-S 0020 SCSI2 Removable
512 Bytes per sector, capacity is 217 MBytes.
------------------------+-------------+-------+-------+-------+-------+-------+
Test mode : result | Poor | OK | Good | Great | Superb|
------------------------+-------------+-------+-------+-------+-------+-------+
Test unit ready command | 1.3[ms] :********************
No motion seek command | 3.8[ms] :
Average latency Time | 5.4[ms] :***************************
------------------------+-------------+-------+-------+-------+-------+-------+
Sequential seek command | 5.2[ms] :********************
Random seek command | 25.3[ms] :***************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/Start 512B/rd| 138.9[KB/s]:***********
Seq.Read/Start 16384B/rd| 1516.8[KB/s]:***********
Seq.Read/Start 65536B/rd| 1523.2[KB/s]:***********
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/ End 512B/rd| 140.5[KB/s]:***********
Seq.Read/ End 16384B/rd| 2153.6[KB/s]:***************
Seq.Read/ End 65536B/rd| 2419.2[KB/s]:*****************
------------------------+-------------+-------+-------+-------+-------+-------+
Random Read 512B/rd| 14.0[KB/s]:***************
Random Read 16384B/rd| 355.2[KB/s]:***************
Random Read 65536B/rd| 921.6[KB/s]:*************
------------------------+-------------+-------+-------+-------+-------+-------+
A>DSKBENCH 3
X680x0 DISK benchmark version 0.44 by bisco
Original program:
ASPI SCSI benchmark test V0.4
copyright(c) by TsuruZoh Tachibanaya, Sep.02,1994
Initiator is ID7 : SHARP X68030 6412 Other-Port
Target device is ID3 : FUJITSU MCR3230SS-S 0020 SCSI2 Removable
512 Bytes per sector, capacity is 508 MBytes.
------------------------+-------------+-------+-------+-------+-------+-------+
Test mode : result | Poor | OK | Good | Great | Superb|
------------------------+-------------+-------+-------+-------+-------+-------+
Test unit ready command | 1.2[ms] :*********************
No motion seek command | 3.8[ms] :
Average latency Time | 5.4[ms] :***************************
------------------------+-------------+-------+-------+-------+-------+-------+
Sequential seek command | 5.1[ms] :********************
Random seek command | 26.3[ms] :**************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/Start 512B/rd| 138.3[KB/s]:***********
Seq.Read/Start 16384B/rd| 2195.2[KB/s]:***************
Seq.Read/Start 65536B/rd| 2496.0[KB/s]:*****************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/ End 512B/rd| 139.2[KB/s]:***********
Seq.Read/ End 16384B/rd| 2131.2[KB/s]:***************
Seq.Read/ End 65536B/rd| 3315.2[KB/s]:***********************
------------------------+-------------+-------+-------+-------+-------+-------+
Random Read 512B/rd| 13.9[KB/s]:**************
Random Read 16384B/rd| 384.0[KB/s]:****************
Random Read 65536B/rd| 1126.4[KB/s]:****************
------------------------+-------------+-------+-------+-------+-------+-------+
A>DSKBENCH 3
X680x0 DISK benchmark version 0.44 by bisco
Original program:
ASPI SCSI benchmark test V0.4
copyright(c) by TsuruZoh Tachibanaya, Sep.02,1994
Initiator is ID7 : SHARP X68030 6412 Other-Port
Target device is ID3 : FUJITSU MCR3230SS-S 0020 SCSI2 Removable
2048 Bytes per sector, capacity is 606 MBytes.
------------------------+-------------+-------+-------+-------+-------+-------+
Test mode : result | Poor | OK | Good | Great | Superb|
------------------------+-------------+-------+-------+-------+-------+-------+
Test unit ready command | 1.2[ms] :*********************
No motion seek command | 3.8[ms] :
Average latency Time | 5.4[ms] :***************************
------------------------+-------------+-------+-------+-------+-------+-------+
Sequential seek command | 5.3[ms] :*******************
Random seek command | 26.3[ms] :**************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/Start 2048B/rd| 490.4[KB/s]:***************************************
Seq.Read/Start 16384B/rd| 2214.4[KB/s]:***************
Seq.Read/Start 65536B/rd| 3020.8[KB/s]:*********************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/ End 2048B/rd| 492.8[KB/s]:***************************************
Seq.Read/ End 16384B/rd| 2195.2[KB/s]:***************
Seq.Read/ End 65536B/rd| 3468.8[KB/s]:************************
------------------------+-------------+-------+-------+-------+-------+-------+
Random Read 2048B/rd| 54.4[KB/s]:****************************************
Random Read 16384B/rd| 380.8[KB/s]:****************
Random Read 65536B/rd| 1190.4[KB/s]:****************
------------------------+-------------+-------+-------+-------+-------+-------+
A>DSKBENCH 3
X680x0 DISK benchmark version 0.44 by bisco
Original program:
ASPI SCSI benchmark test V0.4
copyright(c) by TsuruZoh Tachibanaya, Sep.02,1994
Initiator is ID7 : SHARP X68030 6412 Other-Port
Target device is ID3 : FUJITSU MCR3230SS-S 0020 SCSI2 Removable
2048 Bytes per sector, capacity is 1183 MBytes.
------------------------+-------------+-------+-------+-------+-------+-------+
Test mode : result | Poor | OK | Good | Great | Superb|
------------------------+-------------+-------+-------+-------+-------+-------+
Test unit ready command | 1.2[ms] :*********************
No motion seek command | 3.8[ms] :
Average latency Time | 8.3[ms] :********************
------------------------+-------------+-------+-------+-------+-------+-------+
Sequential seek command | 4.9[ms] :*********************
Random seek command | 26.5[ms] :**************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/Start 2048B/rd| 488.0[KB/s]:***************************************
Seq.Read/Start 16384B/rd| 2163.2[KB/s]:***************
Seq.Read/Start 65536B/rd| 3443.2[KB/s]:***********************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/ End 2048B/rd| 490.0[KB/s]:***************************************
Seq.Read/ End 16384B/rd| 2195.2[KB/s]:***************
Seq.Read/ End 65536B/rd| 3468.8[KB/s]:************************
------------------------+-------------+-------+-------+-------+-------+-------+
Random Read 2048B/rd| 38.4[KB/s]:***************************************
Random Read 16384B/rd| 352.0[KB/s]:***************
Random Read 65536B/rd| 1113.6[KB/s]:***************
------------------------+-------------+-------+-------+-------+-------+-------+
A>DSKBENCH 3
X680x0 DISK benchmark version 0.44 by bisco
Original program:
ASPI SCSI benchmark test V0.4
copyright(c) by TsuruZoh Tachibanaya, Sep.02,1994
Initiator is ID7 : SHARP X68030 6412 Other-Port
Target device is ID3 : FUJITSU MCR3230SS-S 0020 SCSI2 Removable
2048 Bytes per sector, capacity is 2076 MBytes.
------------------------+-------------+-------+-------+-------+-------+-------+
Test mode : result | Poor | OK | Good | Great | Superb|
------------------------+-------------+-------+-------+-------+-------+-------+
Test unit ready command | 1.3[ms] :********************
No motion seek command | 4.1[ms] :
Average latency Time | 8.2[ms] :********************
------------------------+-------------+-------+-------+-------+-------+-------+
Sequential seek command | 5.1[ms] :********************
Random seek command | 28.2[ms] :************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/Start 2048B/rd| 489.6[KB/s]:***************************************
Seq.Read/Start 16384B/rd| 2169.6[KB/s]:***************
Seq.Read/Start 65536B/rd| 3430.4[KB/s]:***********************
------------------------+-------------+-------+-------+-------+-------+-------+
Seq.Read/ End 2048B/rd| 493.6[KB/s]:***************************************
Seq.Read/ End 16384B/rd| 2041.6[KB/s]:**************
Seq.Read/ End 65536B/rd| 3456.0[KB/s]:************************
------------------------+-------------+-------+-------+-------+-------+-------+
Random Read 2048B/rd| 26.0[KB/s]:***************************
Random Read 16384B/rd| 304.0[KB/s]:*************
Random Read 65536B/rd| 1075.2[KB/s]:***************
------------------------+-------------+-------+-------+-------+-------+-------+